Ruijie RG-WLAN Series

Configuration Guide Configuring 802.1X
Description
chap: Indicates CHAP authentication.
pap: Indicates PAP authentication.
Defaults
The default value is eap.
Command
Mode
Global configuration mode
Usage Guide
Select the authentication mode supported by Ruijie Supplicant and authentication server.
Verification
Run the show dot1x command to check whether parameter configurations take effect.
Configuration Example
 Specifying the Authentication Mode
Scenario
The NAS is deployed in standalone mode.
Configuration
Steps
 Set the authentication mode to chap.
Ruijie(config)#dot1x auth-mode chap
Verification
Display the configurations.
Ruijie(config)#show dot1x
802.1X basic information:
802.1X Status ......................... enable
Authentication Mode ................... chap
Authorization mode .................... disable
Total User Number ..................... 0 (exclude dynamic user)
Authenticated User Number ............. 0 (exclude dynamic user)
Dynamic User Number ................... 0
Re-authentication ..................... disable
Re-authentication Period .............. 3600 seconds
Re-authentication max ................. 3 times
Quiet Period .......................... 10 seconds
Tx Period ............................. 30 seconds
Supplicant Timeout .................... 3 seconds
Server Timeout ........................ 5 seconds
Maximum Request ....................... 3 times
Client Online Probe ................... disable
Eapol Tag ............................. disable
802.1x redirect ....................... disable
Private supplicant only ............... disable
