Ruijie RG-WLAN Series User Manual

Configuration Guide Configuring Web Authentication
 Configure the accounting function.
 Configure jitter-off or low traffic detection.
 Configure jitter-off accounting.
Verification
 Simulate the scenario where a client goes online after authentication and then offline because the low traffic threshold is
reached.
 Capture the stop-accounting packet sent by the NAS and check whether the time of low traffic detection is deducted
from the online duration.
Related Commands
 Configuring Jitter-off Accounting
Command
web-auth accounting jitter-off
Parameter
Description
N/A
Command
Mode
Global configuration mode
Usage Guide
Run this command to include the jitter-off duration or low traffic detection time into the online duration in the
stop-accounting packet based on the server accounting policy. By default, they are not included.
Configuration Example
 Configuring Jitter-off Accounting
Configuration
Steps
 Configure jitter-off accounting.
Ruijie(config)#web-auth accounting jitter-off
Verification
 Check whether the configuration is successful.
Ruijie(config)#show running-config
…
web-auth accounting jitter-off
…
1.4.30 Configuring the Portal Communication Port
Configuration Effect
 Configure the port (source port) used for the communication between the NAS and portal server.

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English