Ruijie RG-WLAN Series User Manual

Configuration Guide Configuring Web Authentication
Notes
 Only one port can be configured for the communication between the NAS and portal server.
Configuration Steps
 Configure a port as the portal communication port.
Verification
 After Web authentication is enabled, capture a packet on the portal server during the authentication process and check
whether the source IP address of the packet is the IP address of the specified port.
Related Commands
 Configuring the Portal Communication Port
Command
ip portal source-interface interface-type interface-num
Parameter
Description
N/A
Command
Mode
Global configuration mode
Usage Guide
N/A
Configuration Example
 Configuring the Portal Communication Port
Configuration
Steps
 Configure an aggregate port as the portal communication port.
Ruijie(config)#ip portal source-interface Aggregateport 1
Verification
 Check whether the configuration is successful.
Ruijie(config)#show running-config
ip portal source-interface Aggregateport 1
1.4.31 Configuring a NDKEY-Compatible Webauth URL
Configuration Effect
 Configure the Webauth URL used in Web authentication to support the Shanghai NDKEY system.
Notes

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English