Configuration Guide Configuring Web Authentication
N/A
Configuration Steps
Configuring a NDKEY-Compatible Webauth URL
Set the post parameter in global configuration mode.
web-auth dkey-compatible url-parameter string
string: Indicates the value of the post parameter.
Global configuration mode
Verification
Execute redirection after the configuration and check that the redirection URL contains the post parameter.
Configuration Example
Configuring Noise Reduction Suppression
Configure compatibility parameters.
Ruijie(config)#web-auth dkey-compatible url-parameter login
Check whether the configuration is successful.
Ruijie(config)#show running-config
…
web-auth dkey-compatible url-parameter login
1.4.32 Enabling NAT for Ruijie iPortal Web Authentication
Configuration Effect
Configure Ruijie iPortal Web Authentication to support NAT.
Notes
NAT takes effect only in Ruijie iPortal Web Authentication.
Configuration Steps