Ruijie RG-WLAN Series

Configuration Guide Configuring FAT APs
Scenario
Figure 1-10
FAT APIf one-key WLAN configuration needs to be performed on the AP equipment in a FAT AP
environment, then:
Configuration
Steps
 commands to perform one-key WLAN configuration on the AP equipment:
FAT AP
Ruijie# configure terminal
Ruijie(config)# autowifi
Verification
 Run the show running-config command to check the one-key WLAN configuration.
station-role root-ap
!
interface Dot11radio 2/0
encapsulation dot1Q 10
chan-width 20
country-code CN
no short-preamble
radio-type 802.11a
channel 149
antenna receive 3
antenna transmit 3
rate-set 11a mandatory 6 12 24
rate-set 11a support 9 18 36 48 54
rate-set 11n mcs-support 15
no ampdu-rts
wlan-id 1
station-role root-ap
!