Configuration Guide Configuring Web Authentication
Figure 1-5 Flowchart of WiFiDog Web Authentication
Client logout process:
There are two scenarios of client logout. One scenario is detected by the NAS that a client gets offline for the maximum
online time is out, the upper traffic limit is reached, or the link is disconnected. The other scenario is detected by the portal
server that a client logs out by clicking the Logout button on the logout page.
1. When a client clicks the Logout button, a logout request is sent to the portal server and NAS. (The logout request to the
portal server and NAS may not be simultaneous, depending on the capability of the portal server.)
To Next Page
Loading...
Need help?
General
