Ruijie RG-WLAN Series User Manual

Configuration Guide Basic Management
Configuration Steps
 Configuring Local User Information
 Mandatory.
 Run the username command to configure the account used for local identity authentication and authorization, including
usernames, passwords, and optional authorization information.
 Perform this configuration on every device.
 Configuring Local Authentication for Line-Based Login
 Mandatory.
 Configure local authentication for line-based login in the case that AAA is disabled.
 Perform this configuration on every device.
 Configuring AAA Authentication for Line-Based Login
 (Optional) Perform this configuration to configure AAA authentication for line-based login.
 Configure AAA authentication for line-based login in the case that AAA is enabled.
 Perform this configuration on every device.
 Enabling the Telnet Client Service
 Run the telnet command to log in to a remote device.
 Restoring a Telnet Client Connection
 (Optional) Perform this configuration to restore the connection on a Telnet client.
 Closing a Suspended Telnet Client Connection
 (Optional) Perform this configuration to close the suspended connection on a Telnet client.
 Enabling the Telnet Server Service
 Optional.
 Enable the Telnet Server service when you need to enable Telnet login.
 Configuring the Connection Timeout Time
 Optional.
 An established connection will be closed if no output is detected during the timeout time.
 Perform this configuration when you need to increase or reduce the connection timeout time.
 Configuring the Session Timeout Time
 Optional.

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English