* 0 con 0 --- idle 00:00:00 ---
Ruijie#show line console 0
CON Type speed Overruns
* 0 CON 9600 0
Line 0, Location: "", Type: "vt100"
Length: 24 lines, Width: 79 columns
Special Chars: Escape Disconnect Activation
^^x ^D ^M
Timeouts: Idle EXEC Idle Session
00:10:00 never
History is enabled, history size is 10.
Total input: 490 bytes
Total output: 59366 bytes
Data overflow: 0 bytes
stop rx interrupt: 0 times
Ruijie#show line vty ?
<0-5> Line number
Ruijie#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Ruijie(config)#line vty 35
Ruijie(config-line)#
*Oct 31 18:56:43: %SYS-5-CONFIG_I: Configured from console by console
 After running the show line command, you can find that the number of terminals increases.
 Run the show running-config command to display the configuration.
To Next Page
Loading...
Need help?
General
