Ruijie RG-WLAN Series User Manual

Configuration Guide Configuring RMON
absolute sampling value is smaller than 10, the event is only logged. When the absolute sampling value is
larger than 100, the event is logged and a trap message is transmitted to the NMS.
Configuration
Steps
 Configure the host address for receiving trap messages.
 Configure an event group to process alarm trigger.
 Configure the alarm function.
Agent
Ruijie# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Ruijie(config)# snmp-server community public rw
Ruijie(config)# snmp-server host 3.3.3.3 trap public
Ruijie(config)# rmon event 1 description rising-threshold-event log trap public owner admin
Ruijie(config)# rmon event 2 description falling-threshold-event log owner admin
Ruijie(config)# rmon alarm 1 1.3.6.1.2.1.2.2.1.15.3 60 delta rising-threshold 100 1 falling-threshold 10 2
owner admin
Verification
 Run the show rmon event command to display the event table.
 Run the show rmon alarm command to display the alarm table.
Agent
Ruijie# show rmon event
rmon event table:
index = 1
description = rising-threshold-event
type = 4
community = public
lastTimeSent = 0d:0h:0m:0s
owner = admin
status = 1
index = 2
description = falling-threshold-event
type = 2
community =
lastTimeSent = 6d:19h:21m:48s
owner = admin
status = 1
rmon log table:
eventIndex = 2
index = 1
logTime = 6d:19h:21m:48s

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English