Ruijie RG-WLAN Series User Manual

Configuration Guide Configuring IP Addresses and Services
Ruijie#configure terminal
Ruijie(config)#no ip source-route
Verification
Run the show run-config command to check whether the configuration takes effect.
Ruijie#show running-config
no ip source-route
1.4.8 Configuring an IP Address Pool
Configuration Effect
Assign an IP address to a client through PPP negotiation.
Notes
N/A
Configuration Steps
 Enabling the IP Address Pool Function
 Optional
 Perform the configuration in global configuration mode.
 Creating an IP Address Pool
 Optional
 An IP address pool can be created only after the IP address pool function is enabled. After the IP address pool function
is disabled, the created address pool is automatically deleted.
 Perform the configuration in global configuration mode.
 Assigning an IP Address to the Peer End through PPP Negotiation
 Optional
 Perform the configuration in L3 interface configuration mode.
Verification
Run the show run-config command to check whether the configuration takes effect.
Related Commands
 Enabling the IP Address Pool Function
Command
ip address-pool local
Parameter
Description
N/A

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English