Configuration Guide Configuring DHCPConfiguring DHCP
Figure 4-6 Applying AM Rule on DHCP Relay
A is a core device.
B is a core device.
C is an aggregation device.
D is a wired access device.
E is a wireless access device.
Deployment
Enable DHCP Server on A.
Configure an AM rule, enable DHCP Relay and create a Super VLAN on B.
Create VLANs on C and D to transparently transmit DHCP packets from wired users to B to request IP addresses.
Enable the wireless function on E to transparently transmit DHCP packets from wireless users to B to request IP
addresses.
To Next Page
Loading...
