Ruijie RG-WLAN Series User Manual

Configuration Guide Configuring DHCPConfiguring DHCP
Verification
After login to the DHCP relay agent, run the show running-config command in privileged EXEC mode
to display DHCP Relay configuration.
Ruijie# show running-config | include relay suppression
ip dhcp relay suppression
Ruijie#
Common Errors
Basic DHCP Relay functions are not configured.
4.4.9 Configuring DHCP Client
Configuration Effect
Enable DHCP Client on a device so that it obtains IP addresses and configurations dynamically.
Notes
Ruijie products support DHCP Client configuration on Ethernet, FR, PPP and HDLC interfaces.
Configuration Steps
Run the ip address dhcp command on an interface.
Verification
Check whether the interface obtains an IP address.
Related Commands
 Configuring DHCP Client
Command
ip address dhcp
Parameter
Description
N/A
Command
Mode
Interface configuration mode
Usage
Guide
 Ruijie products support dynamic IP address obtainment by an Ethernet interface.
 Ruijie products support dynamic IP address obtainment by a PPP-encapsulated interface.
 Ruijie products support dynamic IP address obtainment by an FR-encapsulated interface.
 Ruijie products support dynamic IP address obtainment by an HDLC-encapsulated interface.
Configuration
Example
 Configuring DHCP Client
Configuratio
n Steps
1: Enable port FastEthernet 0/0 with DHCP to obtain an IP address.

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English