Ruijie RG-WLAN Series User Manual

Configuration Guide Configuring TCP
 Optional.
 Configure this on the both ends of TCP connection.
 Configuring TCP Window Size
 Optional.
 Configure this on the both ends of TCP connection.
 Configuring the Sending of TCP Reset Packets After Receiving Port Unreachable Messages.
 Optional.
 Configure this on the both ends of TCP connection.
 Configuring MSS
 Optional.
 Configure this on the both ends of TCP connection.
 Configuring MSS Value for TCPv4 SYN Packets
 Optional.
 If the MTU between two routers in TCP transmission is small, you may configure an MSS value on the routers.
 Configuring MSS Value for TCPv6 SYN Packets
 Optional.
 If the MTU between two routers in TCPv6 transmission is small, you may configure an MSS value on the routers.
 Enabling Path MTU Discovery
 Optional.
 Configure this on the both ends of TCP connection.
Verification
N/A
Related Commands
 Configuring SYN Timeout
Command
ip tcp synwait-time seconds
Parameter
Description
seconds: Indicates SYN packet timeout. It ranges from 5 to 300 seconds. The default is 20 seconds.
Command
Mode
Global configuration mode
Usage Guide
In case of SYN flooding, shortening SYN timeout reduces resource consumption. However, it does not work

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English