Ruijie RG-WLAN Series User Manual

Configuration Guide Configuring IPv4/IPv6 REF
9.4.1 Configuring Load Balancing Policies
Configuration Effect
REF supports the following two kinds of load balancing policies:
 Destination address-based load balancing indicates performing hash calculation based on the destination address of
the packet. The path with a greater weight is more likely to be selected. This policy is used by default.
 Implementing load balancing based on the source and destination addresses indicates performing hash calculation
based on the source and destination addresses of the packet. The path with a greater weight is more likely to be
selected.
Notes
-
Configuration Steps
 Optional.
 Perform this configuration if you want to implement load balancing based on the source and destination IP addresses.
 Perform this configuration on a router that connects multiple links.
Verification
Run the show ip ref adjacency statistic command to display the IPv4 load balancing policy. Run the show ipv6 ref
adjacency statistic command to display the IPv6 load balancing policy.
Related Commands
 Configuring Load Balancing Based on IPv4 Source and Destination Addresses
Command
ip ref load-sharing original
Parameter
Description
N/A
Command
Mode
Global configuration mode
Usage Guide
N/A
 Configuring Load Balancing Based on IPv6 Source and Destination Addresses
Command
ipv6 ref load-sharing original
Parameter
Description
N/A
Command
Mode
Global configuration mode
Usage Guide
N/A

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English