Ruijie RG-WLAN Series User Manual

Configuration Guide Configuring NAT
Common Errors
 The inside or outside interface is not configured.
10.4.7 Configuring the Interval at Which NAT Sends Gratuitous ARP Packets
Networking
Requirements
Configure the interval at which gratuitous ARP packets are sent from addresses in the NAT address pool, so as to avoid
address conflicts.
Notes
Sending gratuitous ARP packets is disabled by default on the NAT device.
Gratuitous ARP packets are sent to the outside interface only.
Configuration Steps
 Configuring the NAT Inside Interface
 Mandatory configuration.
 Unless otherwise noted, the interface connecting intranet should be configured as the NAT inside interface.
 Configuring the NAT Outside Interface
 Mandatory configuration.
 Unless otherwise noted, the interface connecting extranet should be configured as the NAT outside interface.
 Configuring Static NAT
 Optional configuration.
 Configure static NAT in global configuration mode when a small number of users in the intranet need to access the
extranet.
 Configuring Dynamic NAT
 Optional configuration.
 Configure dynamic NAT in global configuration mode when a large number of users in the intranet need to access
the extranet.
 Configuring the Interval at Which NAT Sends Gratuitous ARP Packets
 Optional configuration.
 NAT needs to consider some addresses matching the configured rule as local addresses. This configuration is
performed to avoid address conflicts.
Verification
N/A

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English