Ruijie RG-WLAN Series User Manual

Configuration Guide Configuring Web Authentication
 (Mandatory) To enable Web authentication, you must configure and apply the portal server.
 When the NAS finds an unauthenticated client attempting to access network resources through HTTP, it redirects the
client's access requests to the specified Webauth URL, where the client can initiate authentication to the portal server.
The IP address of the portal server is configured as a network resource which clients can access without authentication.
Unauthenticated clients can directly access this IP address through HTTP.
 Configuring the IP Address of the NAS
 Mandatory.
 By default, the IP address of the NAS is not configured.
 Ensure that the configured IP address is accessible by clients.
 Enabling Ruijie iPortal Web Authentication on an Interface
 Mandatory.
 When Ruijie iPortal Web Authentication is enabled in interface configuration mode, Web authentication is not enabled
on any port by default. The users connecting to the port do not need to perform Web authentication.
Verification
 Check whether unauthenticated clients are required to perform authentication.
 Check whether authenticated clients can access the Internet normally.
Related Commands
 Configuring a WiFiDog Webauth Template
Command
web-auth template wifidog
Parameter
Description
N/A
Command
Mode
Global configuration mode
Usage Guide
wifidog means the default WiFiDog Webauth template.
 Configuring the IP Address of the Portal Server
Command
ip { ip-address }
Parameter
Description
Indicates the IP address of the portal server.
Command
Mode
Webauth template configuration mode
Usage Guide
N/A
 Configuring the Webauth URL of the Portal Server

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English