Ruijie RG-WLAN Series User Manual

Configuration Guide Configuring AAA
 Searches for the user domain according to the domain name.
 Searches for the corresponding AAA method list name according to the domain configuration information on the NAS.
 Searches for the corresponding method list according to the method list name.
 Provides the AAA services based on the method list.
If any of the preceding procedures fails, the AAA services cannot be provided.
Figure 2-4 shows the typical multi-domain topology.
Figure 2-4
Related Configuration
 Enabling AAA
By default, AAA is disabled.
To enable AAA, run the aaa new-model command.
 Configuring an AAA Method List
By default, no AAA method list is configured.
For details, see section 5.2.1, section 5.2.2, and section 5.2.3.
 Enabling the Domain-Based AAA Service
By default, the domain-based AAA service is disabled.
To enable the domain-based AAA service, run the aaa domain enable command.
 Creating a Domain
By default, no domain is configured.
To configure a domain, run the aaa domain domain-name command.
 Configuring an AV Set for a Domain
By default, no domain AV set is configured.
A domain AV set contains the following elements: AAA method lists, the maximum number of online users, whether to
remove the domain name from the username, and whether the domain name takes effect.
 Displaying Domain Configuration

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English