Configuration Guide Configuring AAA
This configuration is mandatory if you need to configure an Enable authentication method list. (You can configure only
the default method list.)
By default, no method list of Enable authentication is configured.
Defining a Method List of 802.1X Authentication
Run the aaa authentication dot1x command to configure a method list of 802.1X authentication.
This configuration is mandatory if you need to configure an 802.1X authentication method list (including the
configuration of the default method list).
By default, no method list of 802.1X authentication is configured.
Defining a Method List of PPP Authentication
Run the aaa authentication ppp command to configure a method list of PPP authentication.
This configuration is mandatory if you need to configure an authentication method list for PPP dial-up access.
By default, no method list of PPP authentication is configured.
Defining a Method List of Web Authentication
Run the aaa authentication web-auth command to configure a method list of Web authentication.
This configuration is mandatory if you need to configure a Web authentication method list (including the configuration of
the default method list).
By default, no method list of Web authentication is configured.
Defining a Method List of iPortal Web Authentication
Run the aaa authentication iportal command to configure a method list of iPortal Web authentication.
This configuration is mandatory if you need to configure an iPortal Web authentication method list (including the
configuration of the default method list).
By default, no method list of iPortal Web authentication is configured.
Defining a Method List of SSL VPN Authentication
Run the aaa authentication sslvpn command to configure a method list of SSL VPN authentication.
This configuration is mandatory if you need to configure an SSL VPN authentication method list (including the
configuration of the default method list).
By default, no method list of SSL VPN authentication is configured.
Setting the Maximum Number of Login Attempts
Optional.
By default, a user is allowed to enter passwords up to three times during login.
Setting the Maximum Lockout Time After a Login Failure