Configuration Guide Configuring AAA
Applying EXEC Authorization Methods to a Specified VTY Line
Run the authorization exec command in line configuration mode to apply EXEC authorization methods to a specified
VTY line.
This configuration is mandatory if you need to apply an EXEC authorization method list to a specified VTY line.
By default, all VTY lines are associated with the default authorization method list.
Applying Command Authorization Methods to a Specified VTY Line
Run the authorization commands command in line configuration mode to apply command authorization methods to a
specified VTY line.
This configuration is mandatory if you need to apply a command authorization method list to a specified VTY line.
By default, all VTY lines are associated with the default authorization method list.
Enabling Authorization for Commands in Configuration Modes
Run the aaa authorization config-commands command to enable authorization for commands in configuration
modes.
By default, authorization is disabled for commands in configuration modes.
Enabling Authorization for the Console to Run Commands
Run the aaa authorization console command to enable authorization for console users to run commands.
By default, authorization is disabled for the Console to run commands.
Verification
Run the show running-config command to verify the configuration.
Related Commands
Enabling AAA
Global configuration mode
To enable the AAA services, run this command. None of the rest of AAA commands can be effective if AAA
is not enabled.
Defining a Method List of EXEC Authorization
aaa authorization exec { default | list-name } method1 [ method2...]
default: With this parameter used, the configured method list will be defaulted.
list-name: Indicates the name of an EXEC authorization method list in characters.
To Next Page
Loading...
Need help?
General
