Ruijie RG-WLAN Series User Manual

Configuration Guide Configuring 802.1X
radius-server key
Configures the preshared key for
communication between the NAS and the
RADIUS server.
Configuring 802.1X
Parameters
(Optional) It is used to configure 802.1X parameters.
Ensure that the 802.1X server timeout is longer than the RADIUS server timeout.
Online Ruijie client detection applies only to Ruijie Supplicant.
dot1x re-authentication
Enables re-authentication.
dot1x timeout re-authperiod
Configures the re-authentication interval.
dot1x timeout tx-period
Configures the interval of
EAP-Request/Identity packet
retransmission.
dot1x reauth-max
Configures the maximum times of
EAP-Request/Identity packet
retransmission.
dot1x timeout supp-timeout
Configures the interval of
EAP-Request/Challenge packet
retransmission.
dot1x max-req
Configures the maximum times of
EAP-Request/Challenge packet
retransmission.
dot1x timeout server-timeout
Configures the authentication server
timeout.
dot1x timeout quiet-period
Configures the quiet period after
authentication fails.
dot1x auth-mode
Specifies the authentication mode
(EAP/CHAP/PAP).
Configuring MAB
(Optional) It is used to support MAC Authentication.
dot1x mab
Configures wireless MAB.
dot1x mab-username upper
Enables uppercase letters in MAB user
names.
Configuring Extended
Functions
(Optional) It is used to configure multiple accounts for the same MAC address.
dot1x multi-account enable
Enables multi-account authentication with
one MAC address.
dot1x valid-ip-acct enable
Enables IP-triggered accounting.
dot1x valid-ip-acct timeout
Configures the timeout of obtaining IP
addresses after users get authenticated. If
timeout is reached, they will be kicked off.

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English