Ruijie RG-WLAN Series User Manual

Configuration Guide Configuring Global IP-MAC Binding
Verification
Run the show run command to display the configuration on the device.
7.4.3 Configuring the Exclude Port
Configuration Effect
 The address binding function is disabled on the exclude port, and all IP packets can be forwarded.
Notes
 The configuration can be performed only on a switching port or an L2 aggregate port.
Configuration Steps
 Configuring the Exclude Port
 (Optional) Perform this configuration in global configuration mode when you want to disable the address binding
function on a specified port.
Verification
Run the show run or show address-bind uplink command to check whether the configuration takes effect.
Related Commands
 Configuring the Exclude Port
Command
Syntax
address-bind uplink interface-id
Parameter
Description
interface-id: Indicates the ID of a switching port or an L2 aggregate port.
Command
Mode
Global configuration mode
Configuration
Usage
N/A
Configuration Example
 Configuring the Exclude Port
Configuration
Steps
 Create a global IPv4-MAC binding.
 Enable the address binding function.
 Configure an exclude port.
Ruijie# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English