Ruijie RG-WLAN Series - Page 90

Configuration Guide Configuring WIDS
Configuration
Description and Command
user-isolation permit-mac
Adds an entry to the permissible MAC list for user
isolation.
user-isolation permit-mac max
Configures the length of the permissible MAC list for
user isolation.
Configuring Rogue Detection
and Containment
(Optional) It is used to set the device detection and containment function.
countermeasures enable
Enables the Rogue containment function.
countermeasures ap-max
Configures the maximum number of contained devices
once.
countermeasures channel-match
Enables channel-based containment.
countermeasures interval
Configures the containment interval.
countermeasures mode
Configures the containment mode.
countermeasures rssi-min
Configures the minimum containment RSSI.
device aging duration
Configures the aging duration of the detected devices.
device attack mac-address
Adds an entry to the static attack list.
device attack max
Configures the length of the static attack list.
device black-ssid
Adds an entry to the SSID-based blacklist.
device max-black-ssid
Configures the length of the SSID-based blacklist.
device friendly-flags
Configures the device friendly flag.
device permit mac-address
Adds an entry to the permissible MAC list.
device permit mac-address max
Configures the length of the permissible MAC list.
device permit ssid
Adds an entry to the permissible SSID list.
device permit max-ssid
Configures the length of the permissible SSID list.
device permit vendor bssid
Adds an entry to the permissible vendor list.
device permit vendor bssid max
Configures the length of the permissible vendor list.
device unknown-sta
dynamic-enable
Enables unknown STA detection and containment.
device unknown-sta mac-address
Adds an entry to the unknown STA list
device unknown-sta mac-address
max
Configures the length of the unknown STA list.
device scan-para
Configures the CMCC illegal AP detection.
device detected-ap-max
Configures the maximum number of detected APs.
hybrid-scan radio
Configures the scanning status of a specified radio.
scan-channels { 802.11a |
802.11b } channels
Configures the scanning channel of a specified AP.
configuring AP Working
Modes
(Optional) It is used to set the AP working mode.
device mode
Configures the AP working mode.