Configuration Guide Configuring IGMP Snooping
10.4.5 Optimizing the Wireless Multicast Environment
Configuration Effect
Configure the function of ignoring port timer resetting for query packets on the wireless device.
Notes
IGMP Snooping basic functions must be configured.
Configuration Steps
Configuring the Function of Ignoring Port Aging Timer Resetting for Query Packets
(Optional) Configure the function of ignoring port aging timer resetting for query packets so that the port does not age
within multiple query intervals.
Verification
Run the show ip igmp snooping command to check whether the configuration takes effect.
Related Commands
Configuring the Function of Ignoring Port Aging Timer Resetting for Query Packets
Ip igmp snooping ignore-query-timer
Global configuration mode or ap-config mode
After the function of ignoring port aging timer for query packets is configured, the port does not age within
multiple query intervals. When the port receives a Report request, the port aging timer resets.
10.5 Monitoring
Clearing
Running the clear commands may lose vital information and thus interrupt services.
Clears the dynamic router ports and member
ports.
clear ip igmp snooping gda-table
Displaying
Displays basic IGMP snooping configurations.
show ip igmp snooping [ vlan vlan-id ]