numbers, including icmp, ipv6, tcp, and udp.
src-ipv6-prefix/prefix-len: Indicates that IP packets sent from hosts in the specified IPv6 network segment
are filtered.
host src-ipv6-addr: Indicates that IPv6 packets sent from a host with the specified source IP address are
filtered.
any: Indicates that IPv6 packets sent from any host are filtered.
dst-ipv6-pfix/pfix-len: Indicates that IPv6 packets sent from hosts in the specified IPv6 network segment are
filtered.
host dst-ipv6-addr: Indicates that IPv6 packets sent to a host with the specified destination IP address are
filtered.
any: Indicates that IPv6 packets sent to any host are filtered.
dscp dscp: Indicates that IPv6 packets with the specified the dcsp field in the header are filtered.
flow-label flow-label: Indicates that IPv6 packets with the specified the flow label field in the header are
filtered.
fragment: Indicates that only fragmented IPv6 packets except the first fragments are filtered.
time-range time-range-name: Indicates that this ACE is associated with a time range. The ACE takes effect
only within this time range. For details about the time range, see the configuration manual of the time range.
acl-name: Indicates the name of an IPv6 ACL.
in: Indicates that this ACL controls incoming IPv6 packets of the interface.
out: Indicates that this ACL controls outgoing IPv6 packets of the interface.
To Next Page
Loading...
Need help?
General
