Configuration Guide Configuring SSH
key. If the public information about the RSA key exists, the RSA key has been generated.
Ruijie(config)#show crypto key mypubkey rsa
% Key pair was generated at: 1:49:47 UTC Jan 4 2013
Key name: RSA1 private
Usage: SSH Purpose Key
Key is not exportable.
Key Data:
AAAAAwEA AQAAAHJM 6izXt1pp rUSOEGZ/ UhFpRRrW nngP4BU7 mG836apf jajSYwcU
8O3LojHL ayJ8G4pG 7j4T4ZSf FKg09kfr 92JpRNHQ gbwaPc5/ 9UnTtX9t qFIKDj1j
0dKBcCfN tr0r/CT+ cs5tlGKV S0ICGifz oB+pYaE=
% Key pair was generated at: 1:49:47 UTC Jan 4 2013
Key name: RSA private
Usage: SSH Purpose Key
Key is not exportable.
Key Data:
AAAAAwEAAQAAAHJfLwKnzOgO F3RlKhTN /7PmQYoE v0a2VXTX 8ZCa7Sll EghLDLJc
w3T5JQXk Rr3iBD5s b1EeOL4b 21ykZt/u UetQ0Q80 sISgIfZ9 8o5No3Zz MPM0LnQR
G4c7/28+ GOHzYkTk 4IiQuTIL HRgtbyEYXCFaaxU=
 Specifying the SSH Version
 Run the ip ssh version { 1 | 2 } command to set the version supported by the SSH server to SSHv2.
Ruijie#configure terminal
Ruijie(config)#ip ssh version 2
 Run the show ip ssh command to display the SSH version currently supported by the SSH server.
Ruijie(config)#show ip ssh
SSH Enable - version 2.0
Authentication timeout: 120 secs
Authentication retries: 3
SSH SCP Server: disabled