Chapter 3. Installing Product 3 – 39
■ Auto Sequence
It is activated when the Auto Sequence box is checked. It supports a function to execute all
items in a group in sequential order. It also supports the sequential measurement function for
measuring AFI and Volume in OB.
■ Up, Down
Adjust the order of the groups or items in Label View.
■ Remove
Delete a group or item selected in Group View or Item View.
■ Touch
A Group or an Item can be placed on the touch screen or shown in the Group View or Item
V iew.
– Click the touch button to display a dialog box that shows the touch button.
– Clear All: Delete all groups and items.
– Add Page: Add a page.
– Remove Page: Delete a page.
– Click the touch button to display the groups and items that may be assigned to the button.
– Deleted groups and items from the Touch will be removed from the Group View or Item
View when closing the dialogue box by clicking the Save button.
■ Reset Defaults
Press the Reset Defaults button and then select OK to go to the initial state.
To Next Page