1 – 14 HS40 Service Manual
②
Displays the mode that is currently used.
③
This is the Keyboard button. Clicking this button will activate the On-screen Keyboard.
④
This is the TGC area. Adjust TGC Slide when TGC Curve is activated on the touch
screen. Move the slider to the right to increase Gain and brighten the image. TGC stands
for Time Gain Compensation.
Too great a difference in the gain value settings of adjacent TGC sliders may
cause stripes in an image.
⑤
Menu Area: The menu items that are available in the current input mode are shown in the
form of buttons. The user can access the desired menu item by pressing the
corresponding button. The menu currently in use is shown in blue. To change the values
in the menu, use the ◁ and ▷ buttons.
⑥
Soft Menu Area: The Soft Menu items that are available in the current input mode are
shown. Press or rotate the dial-buttons right below each menu.
TIP
When there are Two Soft Menus
When there are two menus available - upper and lower, both menus can be
adjusted with the corresponding dial-button. Or tap the button for the menu you
want to use on the touch screen and then use the dial-button.
To Next Page
Loading...