48 Operating Instructions Cubis
®
MCA
Getting Started
6 Getting Started
Procedure
t NOTICE Improper connection may damage the device! If the device
isconnected using electronic components, e.g. printer, PC: The device
must be disconnected from the power supply. Ensure that the device
isdisconnected from the power supply.
t Connect the device using electronic components (see electronic
components instructions).
6.1 Installing the AC Adapter
Procedure
t Plug the DC supply cable of the power supply unit into the electronics
module’s “power supply” connection socket and tighten the
threadedfitting.
t Connect the power supply cable to the power supply unit connection.
To Next Page
Loading...
Need help?
General