Sartorius Cubis MCA2.7S User Manual

Operating Instructions Cubis
®
MCA 3
Contents
Contents
1 About these Instructions...........................6
1.1 Scope..........................................6
1.2 Symbols Used..................................6
1.2.1 Warnings in Operating Instructions ....6
1.2.2 Other Symbols .........................7
1.3 Target Groups .................................7
2 Safety Instructions .................................8
2.1 Intended Use ..................................8
2.1.1 Modifications to the Device ............8
2.1.2 Repairs to the Device...................8
2.2 Personnel Qualification........................9
2.3 Significance of these Instructions..............9
2.4 Functionality of the Device ....................9
2.5 Safety Information on the Device..............9
2.6 Electrical Equipment ........................ 10
2.6.1 Damage to the
Device’s Electrical Equipment ....... 10
2.6.2 Working on the
Device’s Electrical Equipment ....... 10
2.6.3 Power Supply Unit
and Power Supply Cable ............. 10
2.7 Conduct in an Emergency................... 10
2.8 Accessories, Consumables,
and Spare Parts ...............................11
2.9 Glass Breakage ...............................11
3 Device Description................................12
3.1 Device Overview..............................12
3.2 Draft Shield . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
3.3 Weighing Pan
and Associated Components . . . . . . . . . . . . . . . . .14
3.4 Connections and Components
on the Backside of the WeighingModule ....14
3.5 Connections on the Control Unit.............15
3.6 Connections and Components on the
Electronics Module...........................15
3.7 Safety Equipment.............................16
3.7.1 Protective Caps
on the Electronics Module ............16
3.8 Displays on the Weighing Module ............16
3.9 Motorized Draft Shield .......................17
3.9.1 Sensor Area ...........................17
3.9.2 Operating Elements
for the Draft Shield ....................17
3.10 Conformity-assessed Devices ................17
3.11 Symbols on the Device .......................18
4 Operating Design .................................19
4.1 Operating Elements in the Main Menu .......19
4.2 Operating Elements in Task Management...20
4.3 Operating Elements
in the Weighing Display.......................21
4.4 Advanced Operator Guidance...............22
4.5 Messages ....................................23
4.6 Status Center ................................24
4.7 Keypad ......................................25
4.8 Status Display of the Buttons ................25
4.9 Buttons in the Operating Display . . . . . . . . . . . . 26
4.9.1 Buttons for Navigation
or Organization in Displays ...........26
4.9.2 Buttons for Editing
or Managing Entries.................. 27
4.9.3 Buttons for Weighing, Printing,
and Export Functions ................28
4.10 Displays in the Operating Display............30
4.11 User Management............................31
4.11.1 User Profiles...........................31
4.11.2 User Login.............................31
4.12 Weighing and Print Profiles...................31
4.13 Tasks and Applications........................31
4.14 Menu Structure..............................32
4.14.1 Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
4.14.2 “Settings” Menu ......................33
4.15 Navigating the Menus .......................39
5 Installation ........................................41
5.1 Scope of Delivery .............................41
5.2 Selecting an Installation Site.................42
5.3 Unpacking the Device .......................42
5.4 Connecting the Ethernet Cable .............43
5.5 Preparing Below-balance Weighing . . . . . . . . . 43
5.6 Procedure ...................................44
5.7 Installing a Microbalance
with GlassDraftShield.......................44
5.7.1 Positioning the Weighing Pan
and Associated Components.........44
5.8 Installing a Filter Balance
with a Metal Ring Draft Shield ...............45
5.8.1 Positioning the Weighing Pan
and Associated Components.........45
5.8.2 Optimizing a Filter Weighing Pan
with a Metal Ring Draft Shield
for Left-handed Users................46
5.9 Connecting the Electronics Module.........47
5.10 Installing Palm-operable Keys
(Only for Devices
with Motorized Draft Shield)................. 47
5.11 Acclimatizing ................................47

Sartorius Cubis MCA2.7S Specifications

General

Brand	Sartorius
Model	Cubis MCA2.7S
Category	Scales
Language	English