Sartorius Cubis MCA2.7S - Parameters in the Weighing and Print Profiles; PDF or CSV Menu

Operating Instructions Cubis
®
MCA 61
System Settings
7.7.6 Parameters in the “Weighing and Print Profiles / PDF or CSV” Menu
Parameter Setting Values Explanation
GLP print Off Deactivates the GLP print.
On* The GLP print is always switched on. All printouts contain
aGLPheader and a GLP footer.
GLP header
orGLP footer
(ifGLPprint “On”)
Standard elements − Adds elements to or deletes elements from the GLP header:
Dashed line, space line, horizontal line, and signature.
− Changes the sequence of the individual elements.
Device information − Adds elements to or deletes elements from the GLP header:
Device ID 1, device ID 2, package version, last calibration,
manufacturer, minUSP, model name, and serial number.
− Changes the sequence of the individual elements.
Task − Adds elements to or deletes elements from the GLP header:
QAPP version, task name, and user name.
− Changes the sequence of the individual elements.
Date and time − Adds elements to or deletes elements from the GLP header:
Date | time report end, date | time report start, and time zone.
− Changes the sequence of the individual elements.
User text − Prints an entered description, e.g., the name of the print profile.
− Adds or deletes up to four user texts.
Measurement
uncertainty
− Adds elements to or deletes elements from the GLP header:
Calibration certificate, accreditation, created by, date, method,
exponent, factor, process accuracy factor, summand.
− Changes the sequence of the individual elements.
Weight value print
elements
Standard elements − Adds or deletes print elements: Dashed line, date | time
ofapplication, space line, horizontal line, time zone, and
username.
− Changes the sequence of the individual elements.
Device information − Adds or deletes the print element “Serial number”.
Weighing − Adds or deletes the following print elements: Data storage
device ID, weight value block (gross, net, and tare value “N, T,
GC”), and weight value.
− Changes the sequence of the individual elements.
Measurement
uncertainty
− Adds or deletes the following print elements: Process accuracy,
absolute uncertainty, and relative uncertainty.
− Changes the sequence of the individual elements.
Connectors USB stick Displays the activated connector for printing.
Profile name
(assigned print
profiles for PDF
and CSV)
PDF document
onUSB
Saves a name assigned for the print profile, e.g., “PDF document”.
Spreadsheet (CSV)
onUSB
Saves a name assigned for the print profile, e.g.,
“Spreadsheet(CSV)”.
Profile description User input Saves an entered description for the print profile.
* Factory setting