Sartorius Cubis MCA2.7S - Parameters in the Connections; Connected Devices; Motion Sensor Menu; Sensors); Parameters in the Connections; Connected Devices; External USB Keys (Only for Connected Peripheral Device) Menu

Operating Instructions Cubis
®
MCA 69
System Settings
7.7.16 Parameters in the “Connections / Connected Devices / Motion Sensor” Menu
(onlyforconnected motion sensors)
Parameter Setting Values Explanation
Number of
gestures
2 gestures (left, right)* Activates the control of functions with 2 gestures.
Gestures: left, right.
4 gestures (left, right,
up, down)
Activates the control of functions with 4gestures.
Gestures: left, right, down, up.
Any gesture Activates the control of functions with any gesture.
Left gesture
Right gesture
Up gesture
Down gesture
No action Disables the functions of the motion sensor.
Start / cancel taring The gesture starts a taring process or cancels a taring process.
Start / cancel zeroing The gesture starts the zeroing process or cancels the zeroing
process.
Zeroing / taring Starts or ends the “Zeroing/taring” function.
Ionizer key If the device is equipped with an ionizer: The gesture starts or ends
the ionizer function.
Takeover key Uses the gesture to start an application or adopts displayed
weight values.
Left key, draft shield If the device is equipped with a motorized draft shield: The gesture
executes the left palm key function.
Right key, draft shield If the device is equipped with a motorized draft shield: The gesture
executes the right palm key function.
* Factory setting
7.7.17 Parameters in the “Connections / Connected Devices / External USB Keys
(onlyforconnected peripheral device)” Menu
Parameter Setting Values Explanation
Press key 1 (F1)
Release key 1 (F2)
Press key 2 (F3)
Release key 2 (F4)
Press key 3 (F5)
Release key 3 (F6)
No action Deactivates the function of the connected device.
Start / cancel taring Starts a taring process or cancels a taring process.
Start / cancel zeroing Starts the zeroing process or cancels the zeroing process.
Zeroing / taring Starts or ends the “Zeroing/taring” function.
Ionizer key If the device is equipped with an ionizer: Starts or ends the ionizer
function.
Takeover key Starts an application or adopts displayed weight values.
Left key, draft shield If the device is equipped with a motorized draft shield: Executes
the left palm key function.
Right key, draft shield If the device is equipped with a motorized draft shield: Executes
the right palm key function.