Sartorius Cubis MCA2.7S - Logging Users in and out; Leveling the Device

78 Operating Instructions Cubis
®
MCA
Operation
8.2 Logging Users In and Out
Procedure
t If the name of the desired user profile is displayed in the entry field (1)
ofthe login display: Press the [Login] button.
t If the name of the desired user profile is not displayed in the entry field
ofthe login display:
t Tap on the entry field in the login display.
y The user selection opens.
t Press the name of the desired user profile.
t If a password has been assigned for the desired user: Enter the
password in the entry field and press the [OK] button.
y The user profile opens and the main menu or the last task being
performed by the active user is displayed.
t To log out the active user profile from the device: Press the
[Log-out]button.
8.3 Leveling the Device
8.3.1 Leveling the Device
Leveling compensates any inclines at the device’s installation site. If leveling
is necessary: The [Leveling] button appears in the weighing display and
amessage appears in the Status Center.
Procedure
t If the weighing display is displayed: Press the [Leveling] button.
t When the Status Center is displayed: Press the [Level] button.
y The Leveling Wizard opens.
t Follow the wizard’s instructions.
1