8 Operating Instructions Cubis
®
MCA
Safety Instructions
2 Safety Instructions
2.1 Intended Use
The device is a high-resolution balance, which can be used in laboratories.
The device was developed to accurately determine the mass of materials in
liquid, paste, powder, or solid form.
Appropriate containers must be used for loading each type of material.
Thedevice can be used in stand-alone operation or can be operated on
aPC.
The device is exclusively designed for use in accordance with these
instructions. Any further use beyond this is considered improper.
If the device is not used properly: The protective systems of the device may
be impaired. This can lead to unforeseeable personal injury or property
damage.
Operating Conditions for the Device
Do not use the device in potentially explosive environments. Only use the
device indoors.
The device may only be used with the equipment and under the operating
conditions described in the Technical Data section of these instructions.
2.1.1 Modifications to the Device
If the device is modified, for example by attaching extra components:
Device safety may be affected, or the device may cease to be compliant.
If you have any queries regarding modifications to the device, contact
Sartorius.
2.1.2 Repairs to the Device
Device repairs may only be carried out by persons with appropriate
specialized knowledge of the device. If the device is not repaired by a
specialist: The safety of the device may be impaired or the quality marks may
lose their validity.
We recommend that any repair work, even that not covered by the warranty,
is carried out by Sartorius Service or after consulting with Sartorius Service.
To Next Page
Loading...
Need help?
General