Sartorius Cubis MCA2.7S User Manual

90 Operating Instructions Cubis
®
MCA
Cleaning and Maintenance
t Wipe the associated components of the weighing pan with a brush
oradamp cleaning cloth, e.g. shield plate, internal draft shield.
t Wipe the device housing with a damp cloth. For more severe
contamination, use a mild soap solution.
Tip
We recommend cleaning the weighing pan on a regular basis, e.g. weekly.
Do not allow deposits to form on the weighing pan.
9.3 Assembling and Connecting the Device
Procedure
t Re-insert all components into the device (to insert components for
microbalance with glass draft shield, see Chapter 5.7.1, page 44.
Toinsert components for filter weighing pan with metal ring draft shield,
see Chapter 5.8.1, page 45).
t Re-connect the device to the power supply (see Chapter 6.2,
page 49).
9.4 Maintenance Schedule
Interval Component Action Chapter, page
Monthly to every 2 years,
depending on the operating
conditions
Device Contact Sartorius Service 17, 106

Sartorius Cubis MCA2.7S Specifications

General

Brand	Sartorius
Model	Cubis MCA2.7S
Category	Scales
Language	English