Sartorius Cubis MCA2.7S User Manual

72 Operating Instructions Cubis
®
MCA
System Settings
7.7.22 Parameters in the “Device Settings/minUSP” Menu
Parameter Setting Values Explanation
minUSP function Off* If this extension has been activated in the QAPP Center:
Deactivates the minimum initial weight.
On If this extension has been activated in the QAPP Center:
Activatesthe minimum initial weight.
Starting point of
operating range
User input If this extension has been activated in the QAPP Center:
Definethe starting point value.
Mark weight
values < minUSP
as invalid
Off* If this extension has been activated in the QAPP Center:
Deactivates the identification of weight values that are less than
the minimum initial weight.
On If this extension has been activated in the QAPP Center: Activates
the identification of weight values that are less than the minimum
initial weight and prevents them being adopted. These values are
not only marked, they cannot be adopted.
* Factory setting
7.7.23 Parameters in the “Device Settings / Measurement Uncertainty” Menu
Parameter Setting Values Explanation
Active Off* If this extension has been activated in the QAPP Center:
Disablesthe measurement uncertainty.
On If this extension has been activated in the QAPP Center:
Activatesthe dynamic display of the measurement uncertainty
forthe weight value.
Method User input If this extension has been activated in the QAPP Center:
Savesaname assigned for the method, e.g., EURAMET cg-18
Calibration
certificate
User input If this extension has been activated in the QAPP Center:
Savesaname assigned for the calibration certificate.
Date User input If this extension has been activated in the QAPP Center:
Definesthe date of the measurement uncertainty.
Created by User input If this extension has been activated in the QAPP Center:
Savesthename of the user.
Accreditation User input If this extension has been activated in the QAPP Center:
Savesthename of the accreditation.
Displayed value Absolute uncertainty* If this extension has been activated in the QAPP Center:
Calculates the measurement uncertainty as an absolute value.
Relative uncertainty If this extension has been activated in the QAPP Center:
Calculates the measurement uncertainty as a relative value.
Process accuracy If this extension has been activated in the QAPP Center:
Calculates the measurement uncertainty according to the input
ofthe process accuracy factors.
* Factory setting

Sartorius Cubis MCA2.7S Specifications

General

Brand	Sartorius
Model	Cubis MCA2.7S
Category	Scales
Language	English