Sartorius Cubis MCA2.7S - Marking Saved Values as Invalid; Marking Saved Values as Valid; Printing Saved Values

Operating Instructions Cubis
®
MCA 85
Operation
t If additional values are to be saved:
t Remove the sample being weighed.
t Place the next sample on the weighing pan and press
the[Confirm]button.
t Type or scan the sample ID into the entry field.
t Press the [OK] button.
8.12.2 Marking Saved Values as Invalid
Procedure
t Press the [Print Memory] button.
y The print memory opens and a list of all saved values is displayed.
t Press the desired items.
y An overview of all data to be printed is displayed for the selected items.
t Press the [Yes] button.
t If a reason for the invalidity of the value needs to be displayed on the
printout: Enter a reason in the entry field and press the [OK] button.
t If no reason for the invalidity of the value needs to be displayed on the
printout: Press the [No] button.
8.12.3 Marking Saved Values as Valid
Procedure
t Press the [Print Memory] button.
y The print memory opens and a list of all saved values is displayed.
t Press the items which are desired to be marked as invalid.
y An overview of all data to be printed is displayed for the selected items.
t Press the [Yes] button.
8.12.4 Printing Saved Values
Procedure
t Press the [Print Memory] button.
y The print memory opens and a list of all saved values is displayed.
t To start the print process using the print profile embedded in the
currenttask: Press the [Print] button.
y A PDF file is produced and sent to the printer defined in the print profile.
For two print profiles with different connectors: The print processes will
be started in succession.