Sartorius Cubis MCA2.7S User Manual

4 Operating Instructions Cubis
®
MCA
Contents
6 Getting Started ...................................48
6.1 Installing the AC Adapter . . . . . . . . . . . . . . . . . . . . 48
6.2 Connecting the Power Supply...............49
6.3 Attaching the Protective Caps...............49
7 System Settings...................................50
7.1 Performing System Settings .................50
7.2 Switching Off the isoCAL Function..........50
7.3 Assigning a Password.........................51
7.4 Opening the Help Function ..................51
7.5 Setting Up Device for Network Printer.......52
7.5.1 Selecting Configuration
for Network Printing..................52
7.5.2 Setting Up Device for
Network Printer via
Independent Wi-Fi Network .........52
7.5.3 Configuring Print Profiles ............54
7.6 Descriptions of Interface Protocols
andWebsite Certificates ....................54
7.7 Parameter List ...............................55
7.7.1 Parameters in the
“User Management” Menu...........55
7.7.2 Parameters in the
“Access Management” Menu ........55
7.7.3 Parameters in the
“Timer-controlled Actions” Menu ....56
7.7.4 Parameters in the “Weighing
and Print Profile / Weighing” Menu...57
7.7.5 Parameters in the
“Weighing and Print Profiles /
YDP30, PC Direct, or SBI Direct”
Menu.................................59
7.7.6 Parameters in the “Weighing and
Print Profiles / PDF or CSV” Menu .....61
7.7.7 Parameters in the “Connections /
Connectors” Menu ...................62
7.7.8 Parameters in the “Connections /
Network” Menu ......................63
7.7.9 Parameters in the “Connections /
Website / Web Services” Menu.......64
7.7.10 Parameters in the “Connections /
Certificates” Menu ...................64
7.7.11 Parameters in the “Connections /
Interfaces / Serial Communication
over Network” (Ethernet) Menu......65
7.7.12 Parameters in the “Connections /
Interfaces / COM-RS232 Interface”
Menu.................................65
7.7.13 Parameters in the “Connections /
Interfaces / USB-B Interface” Menu .. 67
7.7.14 Parameters in the “Connections /
SBI Protocol” Menu ..................67
7.7.15 Parameters in the “Connections /
Climate Modules” Menu .............68
7.7.16 Parameters in the “Connections /
Connected Devices / Motion Sensor”
Menu (only for connected motion
sensors) ..............................69
7.7.17 Parameters in the “Connections /
Connected Devices / External
USB Keys (only for connected
peripheral device)” Menu ............69
7.7.18 Parameters in the “Device Settings /
Date and Time” Menu ................70
7.7.19 Parameters in the “Device Settings /
Safe Weighing” Menu ................70
7.7.20 Parameters in the “Device
Settings / Preload” Menu ..............71
7.7.21 Parameters in the “Device
Settings / Calibration / Adjustment
Report” Menu .........................71
7.7.22 Parameters in the “Device
Settings/minUSP” Menu ............. 72
7.7.23 Parameters in the “Device
Settings / Measurement
Uncertainty” Menu ................... 72
7.7.24 Parameters in the “Device
Settings / Device ID” Menu . . . . . . . . . . . 73
7.7.25 Parameters in the “Device
Settings / Electronic Signature” Menu 73
7.7.26 Parameters in the “Device
Settings / Draft Shield” Menu
(Only for Devices with a
MotorizedDraft Shield) ..............73
7.7.27 Parameters in the “Device
Settings / Start-up Behavior” Menu...75
7.7.28 Parameters in the “Device
Settings / Display Properties” Menu ..75
7.7.29 Parameters in the “Device
Settings / Sound (Loudspeaker)”
Menu................................. 76
7.7.30 Parameters in the
“Device Maintenance” Menu.........76
8 Operation.........................................77
8.1 Switching the Device On and Off.............77
8.2 Logging Users In and Out ...................78
8.3 Leveling the Device..........................78
8.3.1 Leveling the Device ..................78
8.4 Opening and Closing the
Motorized Draft Shield (Only for
Devices with a Motorized Draft Shield) ......79
8.4.1 Defining the Opening Width.........79
8.5 Activating Applications and Adding a Task...80
8.5.1 Activating Applications...............80
8.5.2 Adding an Application to a Task .......81
8.6 Adding Weighing and
Print Profiles to a Task.........................81

Sartorius Cubis MCA2.7S Specifications

General

Brand	Sartorius
Model	Cubis MCA2.7S
Category	Scales
Language	English