Enlarge Font
The installation font is enlargeable from 1~12 times.
The internal bitmap is enlargeable from its standard size of 1~12 times.
For example, if the standard size is enlarged to 3 times with the width 5dot X height 9dot, it becomes at width 15dot X
height 27 dot.
Below is the parameter filling method of printed character at height X enlargement ratio, width X enlargement ratio.
width X enlargement ratio = width parameter setting value
height X enlargement ratio = height parameter setting value
Enlarge Specification <L> is controlling the font size of enlargement. The parameter is specified by the ratio.
For instance, if it is specified as <L>0304, font will be set at horizontal direction X 3 times and vertical direction X 4
times bigger than the standard size.
Character pitch is also enlarged if Expand Specification Command is specified.
Fixed Pitch and Proportional Pitch
XU~XL Font, Outline Font, CG Font can select Fixed Pitch and Proportional Pitch Printing.
Proportional
Pitch Specific
ation can be set
at proportional
pitch specific
ation <PS>,
proportional pitch r
el
ease specification<PR>,or printer’s LCD advance mode.
The proportional pitch size is different depends on font type. If proportional pitch is specified, the width of alphanumeric
will become smaller.
The character width of fixed pitch is based on the font size respectively.
Difference between Outline Font and Bit Map Font
Bitmap font is internally installed at a fixed font height and width size. The actual height of bitmap font is slightly bigger
than the width.
Bitmap font is the biggest size of font matrix.
The reference for font type and font size is at the previous page of Font Table.
Set the height and width of the outline font equally, a well-balanced font can be generated by using the Smooth Scaling
Argorithm Function of the printer. In addition, many font styles such as character decoration, reverse plate, shadow and
italics can be selected.
To Next Page
Loading...
