SATO CL408e - Removing Printers

24
7.3 Modification
Printer
CL408e/412e
M-8400RVe
CL608e/612e
M-5900RVe
M-10e
M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e
7.3 ESC+PS Proportional Pitch
ESC+PS
HEX Code
ESC
PS
Parameter
<1B>16
<50>16<53>16
NIL
Default Value
NIL
Valid Range &
Terms of
Command
When Power is Switched Off
The set command is not maintained
Valid Range within Items
The set command is valid until the next specification is made
Valid Range between Items
The set command becomes valid
[Funciton]
To specify the proportional pitch
[Format]
<PS>
[Coding Example]
<A>
<PS>
<V>100<H>200<P>2<L>0202<XM>ABCD
<Q>2
<Z>
[Supplementary Explanation]
1. When Proportional Pitch Specification <PS> is specified, the width of alphanumeric becomes narrower than before it is specified.
2. Proportional print will not be conducted when data that is not specified is set.
3. Although the setting status of Proportional Pitch Specification <PS> is default at printer initial status, the setting value
(fixed/proportional) of default at printer LCD Advance Mode Setting still can be specified.
[Valid Command]
Modify
<RF>
Font
<XU>
<XS>
<XM>
<XB>
<XL>
<RD>
<$=>
Proportional Pitch