[Function]
To specify enlargement of Print Area (vertical direction)
[Format]
<EX>a
● Parameter
a {Slot Number Specification} = 0 : Internal Memory
[Coding Example]
<A>
<EX>0
<Z>
[Supplementary Explanation]
1.It cannot be used together with Internal Memory Register Data (Form Overlay Register, Foreign Character Register).
2.When specify slot at Memory Area Enlarge Specification <EX>, specify it first after printer power is switched ON.
3.Standard Print Area Specification <AR> and Enlargement Print Area Specification <AX> becomes invalid.
4.If 1 is specified at parameter a, print area will be enlarged at the internal memory.
Model
Print Resolution
(Head Density)
Standard
Standard Print Area
<AR>
To Next Page
Loading...
