SATO CL408e - ESC+; Form Overlay Recall

32
7.11 Modification
Printer
CL408e/412e
M-8400RVe
CL608e/612e
M-5900RVe
M-10e
M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e
7.11 ESC+/ Form Overlay Recall
ESC+/
HEX Code
ESC
/
Parameter
<1B>16
<2F>16
NIL
Default Value
NIL
Valid Range &
Terms of
Command
When Power is Switched Off
The set command is not maintained
Valid Range within Items
The set command is valid until the next specification is made
Valid Range between Items
The set command is valid until the next specification is made
[Function]
To specify Form Overlay Recall
[Format]
</>
[Coding Example]
<A>
</>
<V>200<H>100<P>0<$>B,100,100,6
<$=>SATOPRINTER
<V>720<H>150<B>102100*95000012345*
<Q>2
<Z>
[Supplementary Explanation]
1. Form Overlay Recall Specification </> recalls the registered content by the Form Overlay Registration Specification <&> and then
print it out.
2. If Form Overlay Recall Specificatin </> is detected at normal print data, it proceed to printing with the composition of drawing data
stored in the form overlay.
Form Overlay Recall