SATO CL408e - Esc+D~Esc+D Barcode (Explanation Word Selection)

91
9.3 Barcode
Printer
CL408e/412e
M-8400RVe
CL608e/612e
M-5900RVe
M-10e
M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e
9.3 ESC+D~ESC+d
Barcode (Explanation
Word Selection)
ESC+D~ ESC+d
HEX Code
ESC
D ~ d
Parameter
<1B>16
<44>16 ~ Character Type
abbcccn~n + <d>n~n
Default Value
NIL
Valid Range &
Terms of
Command
When Power is Switched Off
The set parameter is not maintained
Valid Range within Items
The set parameter becomes invalid
Valid Range between Items
The set parameter becomes invalid
[Function]
To specify character type of barcode explanation words.
[Format]
<D>abbcccn~n + <d>n~n
● Parameter
a {Barcode Type} = 3 : JAN/EAN-13
4 : JAN/EAN-8
H : UPC-A
b {Thin Bar Width} = valid range : 01~12 (dot)
c {Barcode Height} = valid range : 001~999 (dot)
n {Print Data} = barcode data
d {Character Type Specification} = XU
XS
XM
XB
XL
OA
OB
n {Print Data} = Explanation Word Data
[Coding Example] Barcode Type: JAN/EAN-13, Thin Bar Width:02, Barcode Height:120,
Barcode Data:4902471006795, Character Type:XS, Explanation Word Data:4902471006795
<A>
<V>100<H>200<D>3021204902471006795
<XS>4902471006795
<Q>2
<Z>
[Supplementary Explanation]
1.To add explanation words at the specified character type.
2.Data not within the specified value will not be printed out, when barcode ratio is small, and bigger character type is selected, the
explanation word may overlap with each other.
3.Explanation word will be performed further at the appropriate location of printer.
4.The explanation word of JAN/EAN-8, JAN/EAN-13, UPC-A is valid based on the following condition.
8 dot/mm(203dpi): {02},{03}is appropriate for thin bar width value.
12 dot/mm(305dpi): {03},{04}is appropriate for thin bar width value.
24 dot/mm(609dpi): {06},{07},{08}is appropriate for thin bar width value.
Barcode
(Explanation Word Selection)