SATO CL408e - 5 Control Command; ESC+A Data Send Start

13
5. Control Command
5.1 Control
Printer
CL408e/412e
M-8400RVe
CL608e/612e
M-5900RVe
M-10e
M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e
5.1 ESC+A Data Send Start
ESC+A
HEX Code
ESC
A
Parameter
<1B>16
<41>16
NIL
Default Value
NIL
Valid Range and
Terms of
Command
When Power is Switched Off
The set command is not maintained
Valid Range within Items
The set command becomes invalid
Valid Range between Items
The set command becomes invalid
[Function]
To specify Data Send Start.
[Format]
<A>
[Coding Example]
<A>
<V>100<H>200<P>2<L>0202<XM>ABCD
<Q>2
<Z>
[Supplementary Explanation]
1.To show item starts, must be used at the beginning of the item.
2.Data Send Start Specification <A> and Data Send End Specification <Z> must be used as a pair.
[Point]
1.All of the command setting value excluded one portion of the system command will return to the default value.
2.Print motion is inactive when Data Send Start Specification <A> is not specified.
Data Send Start