SATO CL408e - Uninstalling the SATO Driver

11
4. View Point of Command Manual
7.2 Modify
Printer
CL408e/412e
M-8400RVe
CL608e/612e
M-5900RVe
M-10e
M-8485Se/90Se/60Se/59Se
M-84Pro-2/3/6
LC408e/412e
ESC+L
HEX Code
ESC
L
Parameter
<1B>
16
<4C>
16
aabb
Default Value
aa=01, bb=01
Valid Range and
Term of
Command
When Power is Switched
Off
The set parameter. is not maintained.
Valid Range within Items
The set parameter is vlaid til it is set to the next specification
Valid Range between Items
The set parameter becomes default value at next item <A>
[Function]
To specify the enlargement ratio of print font.
[Format]
<L>aabb
● Parameter
a {Enlargement Ratio in Horizontal Direction} = Valid Range : 01~12
b {Enlargement Ratio in Vertical Direction} = Valid Range : 01~12
[Coding Example] Enlargement Ratio in Horizontal Direction:4 times, Enlargement Ratio in Vertical Direction:3 times
<A>
<V>100<H>200<P>3<L>0403<XM>ABCD
<Q>2
<Z>
[Supplementary Explanation]
1.Character pitch is enlarged at the same time. When character pitch specification <P> is used at the same time, the parameter value of horizontal
direction enlargement ratio which is specified at enlargement specification <L> will be reflected in the next character pitch specification <P>
2.To enlarge the graphic, specify the enlargement specification <L> before the graphic print command.
[Point]
1.To enlarge the ratio, design the print format which will not exceed the print area.
[Valid Command]
Font
<XU>
<XS>
<XM>
<XB>
<XL>
<X70>
*1
<X71>
*1
<X72>
*1
<X73>
*1
<X74>
*1
<X75>
*1
<X76>
*1
<X77>
*1
<OA>
<OB>
<K1>
*2
<K2>
*2
<K3>
*3
<K8>
*2
<K9>
*2
<k1>
*2
<k2>
*2
<k3>
*3
<k8>
*2
<k9>
*2
Modify
<P>
<RF>
Graphic
<G>
<GM>
<GP>
*1 Valid only for M84PRO
*2 The Optional Kanji ROM is required
*3 Valid only for CL4e/6e (Optional Kanji ROM is required)
① Show the classification of Command
It is classified in “Control”, “Print Position”, “Modify”, “Font”, “Barcode”, “2-D Code”, “Graphic”, “System”, “Memory Card”,
“Calender”.
①
③
④
⑧
⑨
⑩
⑪
⑫
⑬
⑭
②
Enlargement
⑤
⑦
⑥