SATO CL408e - ESC+~B Feed Cut Motion

213
12.10 System
Printer
CL408e/412e
M-8400RVe
CL608e/612e
M-5900RVe
M-10e
M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e
12.10 ESC+~B Feed Cut Motion
ESC+~B
HEX Code
ESC
~B
Parameter
<1B>16
<7E>16<42>16
NIL
Default Value
NIL
Valid Range &
Terms of
Command
When Power is Switched Off
The set command is not maintained
Valid Range within Items
The set command is invalid
Valid Range between Items
The set command is invalid
[Function]
To specify cut motion
[Format]
<~B>
[Coding Example]
<A>
<~B>
<Z>
[Supplementary Explanation]
1.Valid only for cutter specification models.
2.It is a command to feed and cut the label.
3.Divide and use this Cut Motion Specification <~B> from Data Send Start Specification <A> to Data Send End Specification <Z>.
4.Cut Motion Specification <~B> cannot be used with the combination of other commands.
5.Cut Motion Specification <~B> is valid only when it is at stop status without performing cut motion after print motion ended.
[Point]
1. This is a command to feed and cut the label when the it is left at the exit of the printer by Cut Number Label Specification <~A>0 and
Multiple Cut Specification <~>0.
① Label Stop Position
A：Print End
B：No Print
C：No Print
D：No Print
② Receive Command
③ Feed to the Cut Position
④ Cut the label
⑤ Back-feed to the Print Head Position
A
B
C
Cut Position
Head Position
A
B
C
D
B
C
D
B
C
D
①
②
③
④
⑤
②
Label Feed Direction
Feed Cut Motion