SATO CL408e - ESC+F Sequential Number

27
7.6 Modification
Printer
CL408e/412e
M-8400RVe
CL608e/612e
M-5900RVe
M-10e
M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e
7.6 ESC+F Sequential Number
ESC+F
HEX Code
ESC
F
Parameter
<1B>16
<46>16
aaaabcccc(,dd,ee,f)
Default Value
NIL
Valid Range &
Terms of
Command
When Power is Switched Off
The set parameter is not maintained
Valid Range within Items
The set parameter becomes invalid
Valid Range between Items
The set parameter becomes invalid
[Function]
Set before the data specification command of font or barcode, print the specified data sequentially.
[Format]
<F>aaaabcccc(,dd,ee,f)
● Parameter
a {Print Number Specification of the Identical Information}= valid range : 1~9999
b {Increase / Decrease Specification} = + : Addition
- : Reduction
c {Setting of Increase / Decrease Value} = valid range : 1~9999
d {Sequential Number Effective Digit} = valid range : 1~99 omit 8 (omittable)
e {Low Level Invalid Digit} = valid range : 0~99 omit 0 (omittable)
f {Decimal or Hex Sequential Number Specification} = valid range : 0~99 omit 0 (omittable)
0 : Decimal omit 0 (omittable)
1 : HEX
[Coding Example] Print Number of Identical Information:1, increase/decrease specification:+, increase/decrease value:1,
sequential number digit:5, low level invalid digit:0
<A>
<V>100<H>100<P>2<L>0202
<F>1+1,5,0<XU>10000
<Q>2
<Z>
[Supplementary Explanation]
1.The sequential number specification position for 1 format can be set until 8.
2.The black / white inversion <(>is not applicable to the sequential number.
3.The automatic line feed <E> is not applicable.
[Valid Command]
Font
<XU>
<XS>
<XM>
<XB>
<XL>
<OA>
<OB>
Barcode
<B>
<BC>
<BG>
<BI>
<BP>
<D>
<D><d>
<BD>
<BT>
<BW>
Sequential Number