SATO CL408e - Esc+K1(K2) External Character Re-Call Vertical Text Flow

83
8.22 Font
Printer
CL408e/412e
M-8400RVe
CL608e/612e
M-5900RVe
M-10e
M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e
8.22 ESC+k1(k2) External Character Re-Call
Vertical Text Flow
ESC+k1(k2)
HEX Code
ESC
k1(k2)
Parameter
<1B>16
<6B>16<31>16(<6B>16<32>16)
ab~b
Default Value
NIL
Valid Range &
Terms of
Command
When Power is Switched Off
The set parameter is not maintained
Valid Range within Items
The set parameter becomes invalid
Valid Range between Items
The set parameter becomes invalid
[Function]
To specify re-call print specification of vertical text flow of external character registered in the printer memory.
[Format]
<k1>abbn~n
<k2>abbn~n
● Parameter
a {External Character Specification Mode} = H : HEX Character Specification
B : Binary Code Specification
I : with smoothing function based on HEX
C : with smoothing function based on binary code
J : with highlighting function base on HEX
D : with highlighting function based on binary code
K : with smoothing and highlighting function based on HEX
E : with smoothing and highlighting function based on binary code
b {Registration Code} <JIS Code Specification>
H, I, J, K : “9021”~ “907F”
B, C, D, E : 9021H~907FH
<Shift JIS Code Specification>
H, I, J, K : “F040”~“F09E”
B, C, D, E : F040H~F09EH
[Coding Example 1] 16X16 External Character Call-out Specification HEX Character Registration Data of JIS
<A>
<T1>H21
00FF ··········FF00
<Z>
<A>
<V>100<H>200<k1>H9021
<Q>2
<Z>
[Coding Example 2] 24X24 External Character Call-out Specification Binary Code Registration Data of Shift JIS
<A>
<T2>B<40>
16
00FF ··········FF00
<Z>
<A>
<V>100<H>200<k2>B<90>16<40>16
<Q>2
<Z>
[Supplementary Explanation]
1.Re-register if normal printing is not working.
External Character Re-Call
Vertical Text Flow