SATO CL408e - Modifying Printers

22
7. Modification Command
7.1 Modification
Printer
CL408e/412e
M-8400RVe
CL608e/612e
M-5900RVe
M-10e
M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e
7.1 ESC+P Character Pitch
ESC+P
HEX Code
ESC
P
Parameter
<1B>16
<50>16
aa
Default Value
aa=2
Valid Range &
Terms of
Command
When Power is Switched Off
The set parameter is not maintained
Valid Range within Items
The set parameter is valid until the next specification is made
Valid Range between Items
The set parameter becomes default value at the next item <A>.
[Function]
Character pitch is specified by dot number.
[Format]
<P>aa
● Parameter
a {Character Pitch} = Valid Range: 00~99 (dot)
[Coding Example] Character Pitch:10
<A>
<V>100<H>200<P>10<L>0202<XM>ABCD
<Q>2
<Z>
[Supplementary Explanation]
1.Character pitch refers to character gap as well as font gap when selecting font or barcode.
2.The specified character pitch will expand depends on ratio of Enlargement Specification <L>.
3.Even if new line code “CR” is specified at Auto New Line Specification <E>, it maintains as original without returning to default value. It returns
to default value by selecting Data Send Start Specification <A>.
4.By specifying Character Pitch Specification <P> right before specifying the barcode, pitch command becomes valid towards barcode module.
Barcode entitled to is : NW-7·CODE39·Industrial 2 of 5·Matrix 2 of 5
Details can be referred to “9.Barcode Specification Outline (3) Character Pitch Gap”.
5.Data specification except figure or over-digit is specified, it becomes as the default value.
[Valid Command]
Modify
<RF>
Font
<XU>
<XS>
<XM>
<XB>
<XL>
<OA>
<OB>
<RD>
<$=>
<K1>
*1
<K2>
*1
<K8>
*1
<K9>
*1
<k1>
*1
<k2>
*1
<k8>
*1
<k9>
*1
Barcode
<B>
<D>
<D><d>
<BD>
<BT>
<BW>
*1 Requires optional Kanji ROM. (Not supported for LC408e/412e.)
Character Pitch