SATO CL408e - ESC+A1 Label Size

204
12.3 System
Printer
CL408e/412e
M-8400RVe
CL608e/612e
M-5900RVe
M-10e
M-8485Se/90Se/60Se/59Se M-84Pro-2/3/6 LC408e/412e
12.3 ESC+A1 Label Size
ESC+A1
HEX Code
ESC
A1
Parameter
<1B>16
<41>16<31>16
aaaabbbb
Default Value
NIL
Valid Range &
Terms of
Command
When Power is Switched Off
The set parameter is not maintained
Valid Range within Items
The set parameter is valid until the next specification is done.
Valid Range between Items
The set parameter is valid until the next specification is done.
[Function]
To specify label size
[Format]
<A1>aaaabbbb
● Parameter
a {Vertical Label Size} = valid range : refer to the next page
b {Horizontal Label Size} = valid range : refer to the next page
[Coding Example]
<A>
<A1>08000640
<Z>
[Supplementary Explanation]
1. If the label that is smaller than the print head width is used, by specifying the label size with this command, standard start position
can support label size.
2. Backing paper shall be included in the specified label size.
Lebel with
80mm×100mm
100mm
800 dot
（1200 dot
）
【2400 dot
】
400mm
3200 dot
（
4800 dot）
【
9600 dot】
80mm
640 dot
（ 960 dot）
【1920 dot】
104mm
832 dot
（1248 dot）
【2496 dot】
1
1
Standard Start Position
Label Feed Direction
Value of（ ）is 12 dot/mm
Value of【 】is 24 dot/mm
Label Size