SATO CL408e - System Requirements

7
1. Outline
This is the Command Specification for LC400e Series and Overseas ‘e’ Series.
This ‘e’ Series is a general name of printers of Scantro Enhance (CL408e/412e, CL608e/612e, M-8400RVe, M-84Pro, M-5900RVe),
S Series (M-8485Se, M-8490Se, M-8460Se, M-8459Se), M-10e.
In this specification, Dip Switch for setting purpose is shown as DSW.
2. Motion Setting Default Value
The following is the Motion Setting Default Value
LC408e/412e
Item
Default Value
Print Speed
4 inch/sec(100mm/sec) “range: 2, 3, 4, 5, 6”
Print Darkness Range
A “range: A, B”
Print Darkness
3 “range: 1, 2, 3, 4, 5”
Start Position Offset
+0
‘0’ Font Switch Over
YES
Proportional Pitch Specification
Proportional Pitch
CL408e/412e
Item
Default Value
Print Speed
4 inch/sec(100mm/sec) “range: 2, 3, 4, 5, 6”
Print Darkness Range
A “range: A, B”(CL412e only)
Print Darkness
3 “range: 1, 2, 3, 4, 5”
Start Position Offset
+0
‘0’ Font Switch Over
YES
Kanji Code Switch Over
JIS
Proportional Pitch Specification
Proportional Pitch
CL608e/612e
Item
Default Value
Print Speed
6 inch/sec(150mm/sec) “range: 4, 6, 8”
Print Darkness Range
A
Print Darkness
2 “range: 1, 2, 3”
Start Position Offset
+0
‘0’ Font Switch Over
YES
Kanji Code Switch Over
JIS
Proportional Pitch Specification
Proportional Pitch
M-84Pro-2
Item
Default Value
Print Speed
6 inch/sec(150mm/sec) “range: 2, 4, 6, 8, 10”
Print Darkness Range
A
Print Darkness
3 “range: 1, 2, 3, 4, 5”
Start Position Offset
+0
‘0’ Font Switch Over
YES
Kanji Code Switch Over
JIS
Proportional Pitch Specification
Proportional Pitch
M-84Pro-3
Item
Default Value
Print Speed
6 inch/sec(150mm/sec) “range: 2, 4, 6, 8”
Print Darkness Range
A
Print Darkness
3 “range: 1, 2, 3, 4, 5”
Start Position Offset
+0
‘0’ Font Switch Over
YES
Kanji Code Switch Over
JIS
Proportional Pitch Specification
Proportional Pitch